Oliver Machinery 1013.001 Manuel d'utilisation et d'entretien

1 1013 intelliCarve Owner’s Manual Oliver Machinery M-1013 7/2011 Seattle, WA  Copyright 2003 [email protected] www.olivermac

10 Getting to Know Your intelliCarve The Components (see Fig. 2-3) 1. Spindle motor 7. Emergency stop 2. Spindle lock 8. Power swit

11 The Axis System The axis movements are defined according to the operator’s position (facing the front spindle). Keypad Functions 1. + X

12 Installing the Cutting Tool 1 Press pin slightly. 2 Rotate spindle while pressing the pin in order to engage the lock. 3 Loosen the nut with

13Cutting Tools Conical Bit Tool Model No. 381044-000 • Material: Carbide • Flute: 2 • Flute length: 1” / Cut depth: M

14Cutting Tools (cont.) End Mill Bit Tool model No. 381020-000 • Material: Carbide • Flute: 2 • Flute length: 0.47”/ Cut depth: Max

15Installing i-Picture Software (Recommended Operating System – Windows XP, Vista or 7) When you purchase the intelliCarve, it comes with i-Pictu

16Using i-Picture (cont.) 2. Settings Unit: [mm] or [inch] measurement Size of Project is the carving size that you wish to appear on your wo

17Settings (cont.) XY Origin Position represents your picture and how it will be oriented on your work piece. (However this will ultimately be dete

18 Using i-Picture (cont.) 3. Converting a file Once your settings have been entered it is time to convert the image to a .gee code file. Clic

19 Getting Ready to Carve Powering Up the intelliCarve **Ensure carving bit is secure in machine before proceeding** 1. Insert the flash drive i

2 Warranty Oliver makes every effort possible to assure that its equipment meets the highest possible standards of quality and durability. All pr

20Setting Up To Carve (cont.) Setting the work piece on the table The left fence with the ruler represents the Y-axis. Make sure that the Y dim

21Setting Up To Carve (cont.) Using the control panel 1. When you first turn the machine on you will notice the control panel display will read:

22Using the control panel (cont.) 7. Once in ‘Manual Jog Mode’ it is time to move the spindle to the ‘Origin Point’. This is the point that corr

23Using the control panel (cont.) 9. The screen will now show the X,Y,Z origin points confirmation set to zero: 10. Press the ‘BACK’ key on

24Tips 1. When working with thin materials or cutting through your work piece it becomes necessary to place your project on a sacrificial board t

25Advanced Operations CAD/CAM software The 1013 intelliCarve will accept G-code from aftermarket CAD/CAM software programs such as V-Carve Pro or A

26Advanced Operations (cont.) Positioning by coordinate input User can move spindle to certain position by coordinate input: Step 1. Select ”Pos

27Advanced Operations (cont.) Turn on/off spindle in manual jog mode The default setting is ‘Spindle Motor Off’ Example：：：：Turn Spindle Motor On

28Advanced Operations (cont.) Imperial / Metric Unit Change The iCarver default unit is Metric scale in mm, unit can be switched to Imperial in i

29Troubleshooting Operating the unit: Item Problem Check up Solution Note a. Ensure the power switch is turned on. Turn the power switch to “－”

3 WARNING Read this manual completely and observe all warning labels on the machine. Oliver Machinery has made every attempt to provide a safe

30 Troubleshooting Operating the unit: Item Problem Check up Solution Note 3 Front LEDs light on. Ensure USB Flash drive is inserted. Reinser

31 Troubleshooting During operation: Item Problem Check up Solution Note Ensure axes make a small shift. Time counts down shows on the di

32 Troubleshooting During operation: Item Problem Check up Solution Note Turn on Emergency Stop button. Turn off the power switch.

33 Troubleshooting (cont.) A) Situation: Power is on, but the unit does not function. Solution: Press the Emergency Stop and turn it clockwise i

34 C) Display screen shows “Welcome - Enter to Continue”. After pressing “Enter”, the axes return home improperly.

35 Situation #2: X or Y axis does not return to home point. Solution:  Before checking X/Y axis, ensure [C. situation #1] is fully inspecte

36 E) Situation: High pitch sounds from axes. Solution: Clean X & Z screw rods and rails with thinner/lighter lubricant that is equivalen

37 G) Situation: Burrs appear on your project. Solution: Replace the bit. It might be dull or broken. H) Situation: Burrs on the edge Solution:

38• Error 12: Spindle motor overheat • Causes: Spindle motor shuts down automatically when overheating. Solution: Turn off the power. Then restart

4Table of Contents Page Number Warranty...

5Overview Software i-Picture is free software for the intelliCarve series that can automatically output NC code from image files such as jpg, png,

6Technical Features Easy picture engraving by i-Picture’s intuitive picture to g-code convertor File transferred to intelliCarve via USB flash dri

7 Specifications 1013 intelliCarve Item Description Spec 1 Travel 1.1 X axis 331mm(13") 1.2 Y axis 457mm(18") 1.3 Z axi

8Specifications (cont.) 10 Dimension & Weight 10.2 Space (WxL) 630x560x530mm(25.8x22.0x20.8”) 10.3 weight 28 Kg

9Unpacking Your intelliCarve Please unpack your intelliCarve with care. If you discover the machine has been damaged, please report the damage to th